Upgraded Replacement 0130F00010
4.5Editor score
Fits multiple furnace models
High quality metal construction
Pack of three sensors
In this guide
A reliable flame sensor for heater is crucial for maintaining safe and efficient operation in your gas furnace. Without it, your system may shut down unexpectedly or fail to ignite properly.
We compared ten highly rated sensors based on compatibility, durability, and ease of installation. Each product was evaluated for fit, material quality, and customer satisfaction ratings to ensure accuracy.
Each pick shows key specs and real user feedback to help you decide. Keep in mind that prices and availability can change frequently, so verify details before purchasing to get the best value.
Top 3 Picks for Best Flame Sensor for Heater
Rheem 62-23543-01 Genuine OEM
4.6Editor score
Genuine OEM part number
Durable wear resistant metal
Prevents gas valve failure
White-Rodgers Flame Sensor 760-401
4.6Editor score
Universal fit system wide
High temperature Kanthal rod
Thirty inch lead length
Top 10 Best Flame Sensor for Heater in 2026 Compared
Below is a side-by-side comparison of all ten selected flame sensors. Review the specifications and ratings to find the model that matches your furnace brand and requirements.
ProductsSpecificationsEditor scorePrice
Best Budget
Upgraded Replacement 0130F00010
Fits Goodman Amana Kenmore
High quality wear resistant metal
Safe reliable flame detection
Upgraded igniter material
4.5Editor score
Editor's Choice
OEM Upgraded Replacement for Rheem
Appliance part 62-23543-01
Original version replacement
Direct OEM fitment
Standard flame sensor rod
4.7Editor score
Editor's Choice
Rheem 62-23543-01 Genuine OEM
Genuine OEM burner sensor
Exact fit for Rheem
Detects flame presence
Prevents gas dumping
4.6Editor score
SEN01114 Flame Sensor Replacement
Model SEN01114 Flame Rod
Fits Trane American Standard
Premium quality material
Easy to install
4.6Editor score
62-23543-01 Furnace Burner Flame Sensor
Pack of three sensors
Designed for gas HVAC
High quality ceramic metal
Snug fit for Rheem
4.6Editor score
0130F00010 Furnace Flame Sensor
Fits Goodman Amana Kenmore
Precise rod geometry fit
Cures short cycling issues
Commercial grade stainless steel
4.6Editor score
025-37499-000 Furnace Flame Sensor
Fits York Exact Fit
Durable wear resistant metal
Fixes furnace not heating
Prevents unprocessed gas
4.6Editor score
White-Rodgers Flame Sensor 760-401
Hot Surface Ignition Systems
Universal fit type
Kanthal flame rod material
Thirty inch lead length
4.6Editor score
Protech 62-23543-02 Flame Sensor
Termination 1/4 inch male
Sensor offset 1-9/16 inch
Mounting flange 2.5 inch
Sensor angle 90 degrees
4.7Editor score
0130F00010 Furnace Flame Sensor for Good.man
Runs 50000 heating cycles
Safe reliable detection tech
Premium wear resistant metal
Total length 3.8 inches
4.6Editor score
1. Upgraded Replacement 0130F00010 – Best Budget
Upgraded Replacement 0130F00010
Compatible with Goodman Amana
High quality metal ceramic
Three pack value size
Rigorous safety testing
This upgraded replacement flame sensor offers excellent value for homeowners with Goodman, Amana, or Kenmore furnaces. Rated 4.5 stars, it comes in a pack of three, ensuring you have spares for future use.
Pros
- Fits multiple furnace models
- Affordable three pack option
- Reliable flame detection
- High temperature resistant
- Fast ignition support
Cons
- May not fit all models
- Packaging varies by batch
We may earn a commission when you buy through this link, at no additional cost to you.
It is engineered with high quality wear resistant metal and ceramic materials to withstand intense heat. The sensor detects flames reliably to prevent shutdowns and unprocessed gas dumping, maintaining a safe home environment.
While it works well for many standard models, always verify part numbers like B11726-06 before ordering. The fit is precise but minor variations can occur depending on your specific furnace model year.
Budget conscious buyers will appreciate the cost effective solution compared to hiring a technician. If your furnace shuts down after ignition, this sensor is a smart first step to restore heat safely.
Cost Effective Multi-Pack Solution
Getting three sensors in one purchase saves money over time and ensures you have a backup ready if one fails later.
Durable Material Construction
The use of premium metal and ceramic ensures the probe resists corrosion and thermal stress during regular heating cycles.
We may earn a commission when you buy through this link, at no additional cost to you.
2. OEM Upgraded Replacement for Rheem – OEM Style Fit
OEM Upgraded Replacement for Rheem
Part number 62-23543-01
Original version design
Direct OEM replacement
Standard appliance part
Designed specifically for Rheem furnaces, this OEM upgraded replacement carries the part number 62-23543-01. It boasts a strong 4.7 rating from users seeking a direct fit for their units.
Pros
- Matches original specs
- High customer rating
- Simple installation process
- Reliable OEM style
Cons
- Limited part variety
- Not universal for brands
We may earn a commission when you buy through this link, at no additional cost to you.
The sensor follows original specifications to ensure proper flame detection and gas valve control. This minimizes compatibility issues and helps maintain the efficiency of your heating system without modification.
However, since it targets a specific brand, verify your furnace model matches the Rheem specifications. It is not a universal solution but works exceptionally well for those needing an exact match.
Homeowners looking for a no fuss replacement will find this option efficient. It restores standard operation quickly and keeps your furnace running safely without unnecessary guesswork.
Exact Part Number Match
Using the correct OEM number reduces the risk of fit issues and ensures the control board receives accurate signals.
High User Approval
A rating of 4.7 stars indicates that most customers find this part reliable and effective for their Rheem systems.
We may earn a commission when you buy through this link, at no additional cost to you.
3. Rheem 62-23543-01 Genuine OEM – Editor's Choice
Rheem 62-23543-01 Genuine OEM
Genuine OEM part
Exact fit design
Durable metal construction
Detects flame presence
This genuine OEM sensor from Rheem is a top choice for reliability. With a 4.6 rating, it guarantees an exact fit and uses durable, wear resistant metal for long term performance.
Pros
- 1 genuine OEM quality
- Prevents gas valve failure
- Increases efficiency and longevity
- Save time on repairs
Cons
- Higher price than aftermarket
- Limited to Rheem systems
We may earn a commission when you buy through this link, at no additional cost to you.
It is designed to detect flame presence accurately, shutting off the gas valve if no flame is detected. This safety feature prevents unprocessed gas from dumping into your home, protecting your family.
While it costs slightly more than generic replacements, the quality ensures you avoid recurring failures. You save money in the long run by not having to fix your furnace repeatedly.
We recommend this part for Rheem owners who want peace of mind. It is a solid investment for safety and efficiency, ensuring your furnace operates as intended by the manufacturer.
Safety First Design
The sensor actively monitors the flame to shut off gas supply if ignition fails, preventing hazardous gas accumulation indoors.
Value and Longevity
Made with quality materials, this sensor is built to last, offering better value than cheaper alternatives that wear out quickly.
We may earn a commission when you buy through this link, at no additional cost to you.
4. SEN01114 Flame Sensor Replacement – For Trane and American
SEN01114 Flame Sensor Replacement
Model SEN01114 Rod
Fits Trane Standard
Part number list included
Durable premium quality
The SEN01114 flame sensor is crafted for Trane and American Standard residential furnaces. It carries a solid 4.6 rating and includes a list of compatible part numbers to simplify your choice.
Pros
- Direct replacement model
- List of part numbers
- Easy installation
- Well tested material
Cons
- Check manual before buying
- Specific to Trane brands
We may earn a commission when you buy through this link, at no additional cost to you.
This replacement rod is made from durable high quality material and is well tested by the manufacturer. It provides an easy installation experience for those familiar with furnace maintenance tasks.
It is important to consult your machine manual to confirm the part number matches your unit. While it fits many models, checking specifications ensures you avoid ordering the wrong rod.
If you own a Trane or American Standard furnace, this sensor is a convenient repair option. It helps restore normal operation without needing a service call for simple ignition issues.
Comprehensive Part Number List
The product details include part numbers like SEN337 and SEN1114, helping you cross reference your current sensor accurately.
Reliable Manufacturer Testing
The parts undergo testing to ensure they perform as expected under real furnace operating conditions.
We may earn a commission when you buy through this link, at no additional cost to you.
5. 62-23543-01 Furnace Burner Flame Sensor – Three Pack Value
62-23543-01 Furnace Burner Flame Sensor
Pack of three sensors
High quality ceramic metal
Snug fit for Rheem
1/4 male quick connect
This three pack flame sensor rod is designed for Rheem, Ruud, and Weatherking residential furnaces. Rated 4.6 stars, it offers excellent value by including multiple units for future maintenance.
Pros
- Three pack value
- Cost effective repair
- Rigorously tested parts
- Quick install process
Cons
- Verify model fit
- Disconnect power required
We may earn a commission when you buy through this link, at no additional cost to you.
The sensors are made with high quality wear resistant metal and ceramic for durability. Each process is rigorously tested to ensure long lasting performance and efficient flame detection.
Installation is straightforward but requires safety steps like disconnecting power and shutting off gas supply. Using gloves protects your hands while handling the metal components during the swap.
Homeowners can save money from appliance technicians by using this cost effective kit. It resolves common sensor failures quickly and keeps your heating system running safely and efficiently.
Multi Pack Convenience
Having spares on hand means you can replace a failed sensor immediately without waiting for shipping or service calls.
Rigorous Quality Testing
The manufacturer tests each sensor multiple times to ensure it meets performance standards before shipping to customers.
We may earn a commission when you buy through this link, at no additional cost to you.
6. 0130F00010 Furnace Flame Sensor – Precision Fit
0130F00010 Furnace Flame Sensor
Precise rod geometry
Fits Goodman Kenmore
Cures short cycling
Commercial grade steel
This sensor offers precision rod geometry with exact dimensions to avoid common marketplace frustrations. Rated 4.6, it fits Goodman, Amana, and Kenmore systems without requiring custom bending or dangerous alterations.
Pros
- Exact dimensions
- Fits multiple brands
- Sustains safe heat flow
- High temperature resistance
Cons
- Check bend angle carefully
- May need cleaning before install
We may earn a commission when you buy through this link, at no additional cost to you.
Designed to cure short cycling and failure to heat, it detects burner flame accurately. This keeps unprocessed gas from pooling in your home and ensures stable heat flow for comfort.
The build uses professional grade materials including stainless steel that withstands temperatures up to 1800°F. Paired with alumina ceramic, it prevents electrical grounding and crack related sensor failure.
DIY enthusiasts will appreciate the no tech installation that drops into place perfectly. This affordable option saves you from expensive service calls while restoring reliable furnace performance quickly.
Avoiding Fit Issues
The exact 3.8-inch total length ensures the sensor reaches the flame correctly without needing physical modifications.
High Temperature Durability
Stainless steel construction allows the rod to endure intense operating heat without degrading over time.
We may earn a commission when you buy through this link, at no additional cost to you.
7. 025-37499-000 Furnace Flame Sensor – York Replacement
025-37499-000 Furnace Flame Sensor
Fits York exact fit
Durable metal construction
Prevents gas dumping
Value for money
This sensor is tailored for York furnaces with an exact fit design. It maintains a strong 4.6 rating and uses durable metal to increase efficiency and longevity in your heating system.
Pros
- Exact fit for York
- Safe gas valve control
- Increased efficiency
- Affordable price point
Cons
- Only for York units
- Check model compatibility
We may earn a commission when you buy through this link, at no additional cost to you.
It detects the presence of a flame and shuts off the gas valve if none is found. This prevents unprocessed gas from dumping into your home, enhancing safety during operation.
Saving time and money is a key benefit as you avoid major repair bills. The simple replacement process ensures you can fix the furnace without spending a fortune on service calls.
York owners seeking a reliable replacement should consider this option. It restores safe operation and keeps your system running efficiently without needing complex adjustments or tools.
Safety Valve Control
By shutting off gas when no flame is detected, this sensor prevents potential gas hazards inside your living space.
Cost Efficiency
The affordable price allows you to fix the issue quickly without financial stress or long-term service costs.
We may earn a commission when you buy through this link, at no additional cost to you.
8. White-Rodgers Flame Sensor 760-401 – Premium Universal Fit
White-Rodgers Flame Sensor 760-401
Hot Surface Ignition
Universal fit type
Kanthal flame rod
30 inch lead length
This premium White-Rodgers sensor supports Hot Surface Ignition systems with a universal fit design. It earns a 4.6 rating thanks to its robust construction and versatile mounting capabilities.
Pros
- Universal fit systems
- High temp Kanthal rod
- Remotely mountable
- Lead length for reach
Cons
- Higher price range
- Long lead may need management
We may earn a commission when you buy through this link, at no additional cost to you.
The Kanthal flame rod withstands 1800°F heat, while the 30 inch lead length offers flexibility in positioning. You can mount it remotely or on multiple burners for various setups.
While the higher price reflects its quality and versatility, the investment ensures reliable performance in diverse environments. It is ideal for complex systems where standard rods may not reach.
Professionals and advanced DIYers will appreciate the flexibility this sensor provides. It delivers dependable flame detection across different furnace configurations while maintaining safety and efficiency.
Universal Compatibility
Designed as a universal fit, this sensor adapts to a wide range of furnace setups beyond standard brand specific models.
Extended Reach
The thirty inch lead allows for mounting in tight spaces where short sensors cannot reach the burner or igniter easily.
We may earn a commission when you buy through this link, at no additional cost to you.
9. Protech 62-23543-02 Flame Sensor – Detailed Specs
Protech 62-23543-02 Flame Sensor
1/4 inch male quick
2.5 inch flange tip
1-9/16 inch offset
90 degree angle
This Protech sensor offers detailed dimensions including a 2.5 inch mounting flange to sensor tip length. With a 4.7 rating, it provides a reliable replacement for compatible furnace models.
Pros
- Clear dimension specs
- High customer rating
- Standard connection type
- Precise angle design
Cons
- Specific offset length
- Check model manual
We may earn a commission when you buy through this link, at no additional cost to you.
The termination is a standard 1/4 inch male quick connect, making it easy to hook up. The sensor offset angle is set to 90 degrees to align correctly with the burner flame.
While the specs are precise, ensure your furnace requires this exact offset to avoid fit issues. The clear dimensions help you verify compatibility before installation begins.
Those who need a sensor with defined measurements will find this option straightforward. It meets standard requirements for flame detection and ensures proper signal transmission to the control board.
Clear Dimensional Specs
Detailed measurements like 2.5 inch tip length help you confirm fit without needing to measure the old sensor manually.
Standard Connector Type
The 1/4 inch male quick connect terminal ensures compatibility with common control boards in modern furnaces.
We may earn a commission when you buy through this link, at no additional cost to you.
10. 0130F00010 Furnace Flame Sensor for Good.man – Long Life
0130F00010 Furnace Flame Sensor for Good.man
Runs 50000 cycles
Safe reliable detection
Premium wear resistant metal
3.8 inch total length
This sensor is built to run reliably for over 50,000 heating cycles, offering extended durability. Rated 4.6, it uses premium wear resistant metal and ceramic to deliver stable signal transmission.
Pros
- Long operational cycles
- Fits Good.man Kenmore
- 20% faster ignition
- Extended lifespan
Cons
- Verify spelling matches
- Check model fit
We may earn a commission when you buy through this link, at no additional cost to you.
It features a total length of 3.8 inches and a 95mm probe for perfect dimensional compatibility. This design ensures seamless fit with most top brands including Good.man, Ken-more, and Am-ana.
Compared to standard sensors, this upgrade extends lifespan by 2 to 3 times, reducing waste and frequent replacements. The upgraded igniter achieves faster ignition and superior heat resistance.
Owners looking for longevity and safety will benefit from this upgrade. It resolves sudden shutdowns efficiently and helps avoid expensive HVAC repair costs with a simple DIY replacement.
Extended Lifecycle
Running for over 50,000 cycles means this sensor lasts longer than standard models, offering better value over time.
Fast Ignition Performance
The upgraded igniter component provides 20% faster ignition speeds for quicker and more efficient system startups.
We may earn a commission when you buy through this link, at no additional cost to you.
Buying Guide – How to Choose the Best Flame Sensor for Heater
Selecting the right flame sensor for heater requires attention to compatibility and material quality. This guide outlines key factors to consider before purchasing a replacement part.
Furnace Brand Compatibility
Every manufacturer uses specific part numbers and rod dimensions. Always check your furnace model and the old sensor's label to find a match that fits your system.
Verify the part number before ordering to avoid returns and installation issues.
Rod Length and Geometry
The probe must reach the flame zone correctly to detect ignition. Sensors that are too short or long will cause false errors and system shutdowns.
Measure your existing sensor length to ensure the new one aligns with the burner.
Material Quality
High quality stainless steel and ceramic insulators resist heat and corrosion. Low quality materials may degrade quickly under intense furnace temperatures.
Choose sensors with metal and ceramic construction for long term reliability.
Safety Features
A working sensor prevents unprocessed gas from entering your home. It shuts off the gas valve if flame detection fails, ensuring safe operation.
Prioritize models that reliably detect flame presence to avoid gas hazards.
OEM vs Aftermarket
OEM parts match original specifications exactly while aftermarket options often offer lower prices. Aftermarket units are reliable if they have positive user reviews.
Choose OEM for perfect fit or reputable aftermarket for cost savings.
Pack Options
Some products come in three packs which provide value and backups. If you plan multiple replacements or keep spares, a multi-pack is more efficient.
Consider a multi-pack if you need spares for future maintenance or repairs.
Installation Ease
Many sensors are drop in replacements requiring no custom bending. Look for products that fit into place without dangerous alterations or complex tools.
Check reviews for ease of install to save time during the swap.
Customer Support
Reputable sellers offer guidance on compatibility and returns if the part fails. Good customer service can prevent wasted money on wrong items.
Ensure the seller provides support to verify fit before you install.
How to Use and Care for Your Flame Sensor for Heater
Before installing the new sensor, disconnect electrical power and shut off the gas supply to prevent shocks or gas leaks. Wear work gloves to protect your hands from sharp edges during the swap.
Clean the new sensor lightly if needed with a clean cloth to remove any dust from packaging. Ensure the probe is free of debris so it can detect the flame accurately.
After installation, restore gas and power, then test the furnace by running a cycle. Observe if the unit maintains heat without shutting down to confirm the sensor works correctly.
Frequently Asked Questions
What are signs of a failing flame sensor?
If your furnace starts but shuts off after a few seconds, the flame sensor may be dirty or faulty. Other signs include repeated ignition errors or failure to heat consistently. Cleaning or replacing it often fixes this issue.
Can I clean the flame sensor myself?
Yes, you can clean the sensor using fine sandpaper or an emery cloth to remove buildup. Do this gently to avoid damaging the metal rod. However, replacing it is often safer and more reliable if cleaning fails.
Do I need to turn off the gas before changing the sensor?
Yes, always shut off the gas supply and disconnect electrical power before removing or installing the sensor. This prevents gas leaks and electrical hazards during the repair process for safety.
Are all flame sensors universal?
No, flame sensors vary in length, angle, and connector type. While some are universal, most are designed for specific brands or furnace models. Check your old sensor's dimensions to ensure a proper fit.
Why does my furnace keep tripping the safety?
The safety shuts off the gas if the sensor does not detect a flame. This happens when the sensor is dirty, broken, or out of alignment. Replacing the sensor often resolves this recurring trip.
How long does a flame sensor last?
A flame sensor typically lasts several years depending on furnace usage. High quality sensors may run for tens of thousands of heating cycles. Replacing it every few years prevents unexpected failures.
Is it safe to install a flame sensor yourself?
It is safe if you follow instructions and shut off power and gas first. Use gloves and check compatibility to avoid issues. If unsure, hire a professional to ensure correct installation and safety.
What part number should I match?
Check the label on your old sensor for the exact part number. Match this number with the new one to guarantee compatibility. Verify your furnace model if you are uncertain about the code.
Final Thoughts on Choosing the Best Flame Sensor for Heater
We compared ten flame sensors for heater systems ranging from budget packs to premium universal models. The top picks include the Upgraded Replacement pack for cost value and the Rheem OEM part for exact fit.
Prioritize compatibility and material quality to ensure safe operation. Choosing a sensor with the right rod length and metal construction prevents recurring shutdowns and keeps your family protected from gas risks.
Prices and availability can change frequently, so verify current details before purchasing. Always check your furnace model and part number to select the right replacement for your system.